FREE SHIPPING OVER $30, ALL ORDERS SHIPPING FROM USA WAREHOUSE
Free USA Domestic Shipping over $99
Home > Electronics > ESC > Program Card > LED Program Card For Brushless ESC
LED Program Card For Brushless ESC
LED Program Card For Brushless ESC
Item# 07E-HobbyWing-LED-ProgramCard

$8.99
This item is currently out of stock!
Need help on flying? Go RC Discuss

Model

 LED Program Card (Version 2.0)

Manual

 User Manual

Accessory

    

Preview
This program card is used to set the programmable parameters of brushless ESC, it has a friendly user interface to set the programmable parameters very easily. It is pocket-sized, so you can bring it to the racing or flying field conveniently.
 
This program card has 3 kinds of front panel to suitable for the following ESCs:
A)  Product Number:  LED_PC2A
      This is available for PLATINUM series aircraft/heli ESC;

 
B)  Product Number:  LED_PC2B
      This is available for SEAKING series boat ESC;

 
C)  Product Number:  LED_PC2C
      This is available for XERUN and EZRUN series (Version 2.0 ) car ESC;
 
The hardware and software of the above 3 models of program cards are identical, so you can print the different front panel when using the program card with different ESC. 
 
1  Specification

 
1.1 Size:  88mm (L) * 58mm (W) * 14mm (H)
1.2 Weight:  40g.
1.3 Input Voltage:  4.8-6V (If the ESC hasn??t a built-in BEC, you must use an additional battery pack to supply the program card)   


2  Programmable Items

 

A)  The programmable items of LED_PC2A  (Available for PLATINUM series aircraft/heli ESC)  
#1    Brake Setting
#2    Battery Type
#3    Low Voltage Protection Mode (Cutoff Mode)
#4    Low Voltage Protection Threshold (Cutoff Threshold)
#5    Start Mode
#6    Timing
#7    Governor Mode
#8    Motor Type
#9    PWM Frequency
#10  Built-In BEC Output
#11  Motor Load
#12  Lipo Cells
 
         Front Panel Picture of LED_PC2A:
B)  The programmable items of LED_PC2B  (Available for SEAKING series boat ESC) 
#1    Running Mode
#2    Lipo Cells
#3    Low Voltage Cutoff Threshold 
#4    Timing
 
         Front Panel Picture of LED_PC2B:


C)  The programmable items of LED_PC2C  (Available for XERUN and EZRUN series car ESC of Version2) 
#1    Running Mode
#2    Drag Brake Force
#3    Low Voltage Cut-Off Threshold
#4    Start Mode
#5    Maximum Brake Force
#6    Maximum Reverse Force
#7    Initial Brake Force
#8    Throttle Neutral Range
#9    Timing
#10  Over-Heat Protection
#11    Motor Rotation
#12    Lipo Cells
(Note: The item #11 and #12 are not available for XERUN series ESC of Version 2, they only available for EZRUN series ESC)   

         Front Panel Picture of LED_PC2C:
 
B

Customers Also Bought These Best Sellers

Best Price Guarantee