The DJI Zenmuse H3-2D Gimbal is another milestone in gimbal innovation, which is designed for the GoPro Hero3. With its high precision, high stability, lightweight, plug and play features, it is widely used in film and television productions, advertising aerial photography, etc. Even if the aircraft is in high-speed flight, it can still stabilize and control the GoPro camera precisely with the highest stability. The precision of control angle is within the range of ±0.08°, so picture or video output can reach the best quality.

Easy to install, Plug and Play.

No additional manual adjustment required, no need to adjust the C.G. or parameters in the software. In addition, the installation process is extremely simple and the plug-and-play characteristics make it easy for users to experience the performance of the H3-2D

Customized for GoPro Hero3

The H3-2D gimbal is designed for the GoPro Hero3, and remote start/stop shooting, video transmission (video downlink required), etc of the GoPro Hero3 will be supported by future firmware upgrades.

Compatible with DJI flight control systems

The H3-2D gimbal is compatible with DJI flight control systems, it can adjust the roll and pitch angle according to the accurate control of the Gimbal feedback and communicate with the MC in real-time. Currently it supports WooKong-M, NAZA-M, Phantom, and will support Ace, WooKong-H, NAZA-H in the future

The Core Technology Inherited from the Zenmuse

The H3-2D gimbal inherited the core algorithm from the Zenmuse Z15 gimbal and the unmanned aircraft flying attitude stability control algorithm. Combined with the high precision sensors and brushless motors, the DJI Zenmuse H3-2D gimbal provides pixel level stabilized footage.

Independent IMU module

The independent high-precision IMU module provides precise attitude data and the closed-loop control gives improved control accuracy.Without the requirement of complex installation and connection of many wires, it is also easy to assemble and remains stable when in flight

Extremely light weight with solid mechanical design

The aluminum alloy material and innovative mechanical design makes the gimbal extremely light weight (total 230g, GoPro Hero3 included). The structural design of the aluminum frame guarantees the strength of the gimbal

Ideal Choice for Phantom and Flame Wheel

The mechanical design, weight and power supply will match the Phantom and Flame Wheel perfectly. The Phantom transmitter can be easily upgraded to give the pitch(tilt) control function of the gimbal, with a customized slider. No additional receiver channels are needed, it just uses the additional MC channels

Online Upgrade

The functionality can be easily updated by online firmware upgrades

Built in Functions:
-2-Axis Gimbal
-Light-weight
-GoPro Supported
-Based on Zenmuse
-All aluminum construction
-Built-in independent IMU module
-Dji gimbal special servos drive module
-WKM/NAZA-M/NAZA-M V2/PHANTOM supported

Mechanical & Electrical Characteristics
Working Current: 400mA @ 12v Static / 600mA @ 12v Dynamic
Operating Temperature: -10C-50C
Gimbal Weight: 230grams
Gimbal Output Power: 12-16.8v
Gimbal Dimensions: 99.5mm x 85.5mm x 92.75mm
GCU BEC Output:10A@12V
GCU Wiresless Video Transmission Power 1A@12V
GCU Weight: 22grams
GCU Dimensions: 42mm x 32mm x 9.3mm

Working Performance:
Controlled Angle Accuracy: +/- 0.08 Degrees
Max Controlled Speed: Tilt axis +/- 130 deg per second. Roll axis +/- 30 deg per second
Controlled Rotation Range: Tilt axis control -130 to +50 degrees. Roll axis +/- 39 degrees

Peripheral:
Supported Camera: GoPro Hero 3
GCU Input Power: 3S-6S Lipo
Assistant Software System Requirement: Windows XP SP3; Windows 7; Windows 8

***NOTE***

If you do not have the Naza-M PMU V2 board for your DJI Phantom you will need this add-on for the system to operate correctly.

** All return or exchange of DJI products will be subjected to a 15% restocking fee. All return or exchange of DJI products must be in new and unopened condition